OCTURA FOR
FASTER AND BETTER R/C MODEL POWER BOATING
ALL OCTURA
PRODUCTS CAN BE ORDERED FROM US AND MAILED WORLDWIDE, OCTURA MOTOR MOUNTS,
OCTURA RUDDERS, OCTURA FLEX CABLES, OCTURA COUPLINGS, OCTURA FLEX
HEXES, OCTURA STRUTS, ETC
|
|
|
|
|
|
HUMM - DINGER MOTOR MOUNTS |
|
OC-V330 |
3” WIDE FOR SMALL ENGINES
|
|
$17.50 |
|
OC-V65 |
5” WIDE FOR 7.5
TO 11cc ENGINE |
|
$86.90 |
|
OCV-90 |
5” WIDE FOR 15cc ENGINE
|
|
$93.90 |
|
OCRM/S |
SMALL RUBBER MOUNTS
(Set of 4) |
|
$16.50 |
|
OCRM/L |
LARGE RUBBER MOUNTS
(Set of 4) |
|
$36.90 |
|
RUDDER
PACKAGES |
 |
OCSTRUDM |
STRUT/RUDDER ASSEMBLY CONSISTS OF WEDGE RUDDER
BLADE
WITH WATER PICK UP, ALUMINUM MOUNTING BRACKET WITH RUDDER IN LINE WITH
STRUT, 2 X NYLON TILLER ARM, RUDDER PIVOT BRACKET WITH 2-SLEEVE BEARINGS
INSTALLED, 2 X PIVOT SHAFT, EXTRUDED ALUMINUM STRUT BLADE BORED 11/32", NUTS & BOLTS
|
|
$59.00 |
 |
OCSTRUD2R |
STRUT/RUDDER ASSEMBLY CONSISTS OF TWIN
RUDDERS, BOTH WITH WATER PICK
UP, ALUMINUM MOUNTING BRACKET,
OFFSET CONVERSION PACKAGE, 4 X NYLON TILLER ARM, RUDDER PIVOT BRACKET WITH
2-SLEEVE BEARINGS INSTALLED, 2 X PIVOT SHAFT WITH 2 WASHERS AND SNAP RING,
EXTRUDED ALUMINUM STRUT BLADE BORED 11/32", NUTS & BOLTS
|
|
$110.00 |
|
OC6WRL
|
ALUMINUM
LARGE WEDGE RUDDER WITH WATER PICK UP,
2 X TILLER ARMS, PIVOT
SHAFT, MOUNTING & SLEEVE
BEARINGS TO SUIT .60 NITRO'S OR
LARGER
|
|
$42.00 |
| |
OC6WRC |
WEDGE
RUDDER ASSEMBLY CONSISTS OF RUDDER BLADE, 2 X TILLER ARMS, PIVOT SHAFT &
BRACKET WITH WASHERS, SLEEVE BEARINGS AND SNAP RING |
|
$36.00 |
 |
OC4WR
|
COPPER
BERYLLIUM WEDGE RUDDER ASSEMBLY
& PIVOT BRACKET & 2 X 1/8" ID SLEEVE BEARINGS / PIVOT SHAFT /
MOUNTING BRACKET WITH 5-40 NUT/BOLT 4 X 4-40 SS BOLTS TO SUIT SMALL NITRO OR DIRECT DRIVE ELECTRIC |
|
$69.00 |
 |
OC4WRA |
CAST ALUMINUM WEDGE RUDDER ASSEMBLY
& PIVOT BRACKET & 2 X 1/8" ID /PIVOT SHAFT /MOUNTING BRACKET WITH
5-40 NUT/BOLT 4 X 4-40 SS BOLTS FOR USE ON DIRECT DRIVE ELECTRIC |
|
$79.00 |
|
STRUDDER
PACKAGES |
 |
OC6SBCOML-150 |
COPPER
BERYLLIUM STRUT BLADE 3/16" SLEEVE BEARINGS & INSTALLED .NOSE PIECE CAST COPPER
BERYLLIUM MOUNTING BRACKET & DRIVE DOG NYLON WASHER 3/16" PROP SHAFT
COUNTER BORED FOR INCLUDED 18" .150 FLEX CABLE & TEFLON TUBE WITH
NUT FOR .21 NITRO AND GEARED ELECTRICS |
|
$79.00 |
 |
OC4STR-CDA |
RECOMMENDED FOR ELECTRIC
POWERED BOATS. THE ALUMINUM STRUDDER ASSEMBLY INCLUDES THE OC4OFF ALUMINUM
BRACKET THAT ALLOWS THE RUDDER TO BE OFFSET RIGHT OR LEFT. THIS ALLOWS THE
STRUT TO BE MOVED TO A SURFACE APPLICATION ON A DIRECT DRIVE HULL OC4WRC
WEDGE RUDDER , OC4STBR STRUDDER MOUNTING BRACKET, OC4SBEPA STRUT
BLADE WITH SLEEVE BEARINGS AND NOSE PIECE OC4D, DOG DRIVE FOR OC4PS 1/8'PROP
SHAFT WHICH IS COUNTER BORED FOR .098 FLEX SHAFT, TEFLON TUBING, OC4PN
PROP NUT, NYLON WASHERS, OC4PS 1/8' Prop Shaft |
|
$142.90 |
|
STRUDDER BRACKETS |
| |
OC6PIBR |
RUDDER PIVOT BRACKET EXTRUDED ALUMINUM & 2 x LEAD TEFLON
BEARINGS-USED IN STRUDM |
|
$13.00 |
| |
OC6PIBR2 |
OFFSET PIVOT BRACKET EXTRUDED ALUMINUM & 2 x LEAD TEFLON
BEARINGS WITH 2 HOLES FOR OFFSET RODS & 10-32 SET SCREWS - USED IN STRUD2R
(TWIN RUDDER) |
|
$13.00 |
|
OC6STBR
|
TWO
PIECE ALUMINUM MOUNTING BRACKET WITH
NITS & BOLTS |
|
$29.50 |
|
|
|
|
|
|
STRUT
BLADES |
|
OC DVMBO |
ALUMINUM
STRUT BLADE
|
|
$17.50 |
|
OCSSSLBO |
STAINLESS STEEL STRUT LARGE
WITH SKEG 11/32" |
|
$59.00 |
| |
OC6SBEPA-150A |
ALUMINUM
STRUT & 2 x 3/16" SLEEVE BEARINGS / INSTALLED NOSE PIECE FOR .150 CABLE &
3/16" PROP SHAFT ELECTRIC |
|
$37.50 |
|
WEDGE RUDDER
BLADES |
|
WRBOLO |
ALUMINUM
6
3/8" LONG WEDGE RUDDER
BLADE ONLY
|
|
$18.50 |
|
FLEXI
CABLE |
|
|
OC130L-24A |
24” .130 FLEX CABLE - LEFT LAY
|
|
$5.00 |
|
OC150L-24A |
24” .150 FLEX CABLE - LEFT LAY
|
|
$7.50 |
|
OC187L-24A |
24” .187 FLEX CABLE - LEFT LAY |
|
$6.50 |
|
OC187R-24A
|
24” .187 FLEX CABLE -
RIGHT LAY
|
|
$6.50 |
|
OC250L-24A |
24” .250 FLEX CABLE - LEFT LAY
|
|
$18.00 |
|
OC250R-24A |
24” .250 FLEX CABLE -
RIGHT
LAY
|
|
$24.00 |
 |
OC6SQL-24A |
24” .187 CABLE LEFT
LAY
ONE END SQUARE
|
|
$13.00 |
| OC8SQL-18
|
18” .250 CABLE LEFT
LAY ONE END SQUARE
|
|
$13.00 |
| OC8SQL-24A |
24” .250 CABLE LEFT
LAY ONE END SQUARE
|
|
$18.50 |
| OC8SQR-24A |
24” .250 CABLE
RIGHT
LAY ONE END SQUARE
|
|
$18.50 |
| OC8SQL-36 |
36” .250 CABLE LEFT
LAY
TWO ENDS SQUARE
|
|
$24.00 |
|
TEFLON TUBING |
| |
OC130T-24 |
24” .130 TEFLON TUBING for .130 FLEX CABLE
|
|
$4.90 |
|
OC150T-24 |
24” .150 TEFLON TUBING for .150 FLEX CABLE
|
|
$6.00 |
|
OC187T-24 |
24” .187 TEFLON TUBING for .187 FLEX CABLE |
|
$7.00 |
|
OC250T-24 |
24” .250 TEFLON TUBING for .250 FLEX CABLE |
|
$8.50 |
PROP SHAFTS
|
 |
OC6PS |
PROP SHAFT
3/16" OD - 3 1/4"
LONG + 7/16" OD DOG DRIVE 10-32 THREAD - NOT
FOR NEEDLE BEARINGS
|
|
$8.50 |
 |
OC6PSHM |
PROP SHAFT
3/16" OD - 3 1/2"
LONG + 3/8" OD DOG DRIVE UNTHREADED-HARDENED-USE WITH NEEDLE
BEARINGS |
|
$13.00 |
|
|
OC6130PS |
PROP SHAFT
3/16" OD - 2 1/4"
LONG - COUNTER BORED FOR .130 FLEX CABLE WITH THREADED 10-32-HARDENED |
|
$7.00 |
|
|
OC6150PS |
PROP SHAFT
3/16" OD - 2 1/4"
LONG - COUNTER BORED FOR .150 FLEX CABLE WITH THREADED 10-32-HARDENED |
|
$7.00 |
 |
OC68PS
|
PROP SHAFT
1/4” FOR SLEEVE BEARINGS
STEPPED TO 3/16”
PROP END + THRUST WASHER SET+ PROP NUT + DRIVE DOG |
|
$20.00 |
 |
OC8PS |
PROP SHAFT
1/4" OD - 4 1/2" LONG + ½” DRIVE DOG + 1/4-28
THREADED TAIL NUT - NOT FOR NEEDLE BEARINGS
|
|
$21.00 |
|
OC8PSH |
PROP SHAFT ¼”
" OD - 4" LONG + ½” OD DOG DRIVE + PROP NUT - UNTHREADED
- USE WITH SLEEVE
BEARINGS
|
|
$25.00 |
| |
OC64PKGPS |
PROP SHAFT
STEPPED 3/16
" OD - 1/8" AT PROP END. 2 1/4" LONG COUNTER BORED FOR .130
FLEX CABLE-
THREADED 5-40
|
|
$8.40 |
|
PROP
TAIL NUT |
|
|
OC4PN |
PROP
TAIL NUT FITS 5-40 THREADED ON 1/8" SHAFT - BRASS- 7/32 HEX - 9/16" LONG |
|
$5.50 |
|
 |
OC6PNMU |
PROP
TAIL NUT FITS UNTHREADED 3/16" SHAFT - 3/8" DIA - 3/4" LONG |
|
$5.90 |
|
OC6PNS |
PROP
TAIL NUT FITS 10-32 THREAD ON 3/16" SHAFT - 7/16 DIA - 13/16" LONG |
|
$6.30 |
|
OC8PNU |
PROP TAIL NUT FITS UNTHREADED 1/4" SHAFT - 7/16" DIA - 13/16" LONG |
|
$6.00 |
|
OC8PNM |
PROP
TAIL NUT FITS THREAD 1/4" SHAFT- 3/8" HEX - 15/16"
LONG |
|
$5.00 |
|
DRIVE DOGS |
| |
OC4D |
DRIVE DOG
1/8”
ID ¼” OD -
BRASS WITH 4-40 SET SCREWS
|
|
$5.00 |
|
OC6D |
DRIVE DOG ¼”
ID ½” OD WITH
8-32 SET SCREWS
|
|
$5.00 |
|
|
OC6DM
|
DRIVE
DOG 3/16” ID - 3/8”OD
WITH 8-32 SET SCREWS
|
|
$5.00 |
|
|
OC6DMM
|
DRIVE
DOG 3/16” ID - 5/16”OD
WITH 4-40 SET SCREWS
|
|
$5.20 |
| |
OC8D |
DRIVE DOG ¼”
ID ½” OD
WITH 8-32 SET SCREWS
|
|
$6.50 |
| |
OC8DM
|
DRIVE DOG ¼”
ID - 7/16" OD WITH
8-32 SET SCREWS |
|
$5.50 |
| |
|
|
|
|
|
REDUCER BUSHING
|
|
OC68RB
|
REDUCER BUSHING
BRASS 1/4" OD-3/16" ID - TO INSTALL 1/4" BORE PROPS
0N 3/16" SHAFT
|
|
$3.00 |
|
OC8RB
|
REDUCER BUSHING PLATED
STEEL 11/32" OD - 1/4" ID TO INSTALL OC6LTS 3/16"
ID SLEEVE BEARING INTO 11/32" BORE STRUT
|
|
$3.50 |
|
OC10RB
|
REDUCER BUSHING PLATED
STEEL 11/32" OD - 5/16" ID TO INSTALL OC8LTS 1/4"
ID SLEEVE BEARING INTO 11/32" BORE STRUT
|
|
$4.80 |
|
OC10RB916
|
REDUCER BUSHING
BRASS 7/16" OD - 5/16" ID TO INSTALL 2 x OC8LTS
1/4" ID SLEEVE BEARING INTO 7/16" BORE STRUT
|
|
$4.00 |
|
THRUST WASHERS
|
|
OC6TWM
|
2 X HARDENED STEEL & 2 X MOLY NYLON 3/16”ID - 3/8” OD |
|
$3.60 |
|
OC6TW
|
2 X HARDENED STEEL & 2 X MOLY NYLON 3/16”ID - 7/16” OD |
|
$4.00 |
|
OC8TW
|
2 X HARDENED STEEL & 2 X MOLY NYLON
1/4” ID - 1/2" OD |
|
$4.50 |
|
BEARINGS
|
| |
OC4LTSB
|
LEAD
TEFLON SLEEVE BEARING 1/8”
( 5 per pkt ) |
|
$12.50 |
|
OC6LTSB
|
LEAD
TEFLON SLEEVE BEARING 3/16”
( 5 per pkt ) |
|
$11.00 |
|
OC8LTSB
|
LEAD TEFLON
SLEEVE
BEARING
1/4"
(
5 per pkt ) |
|
$17.50 |
|
OC6NE
|
NEEDLE BEARING 3/16” SHAFT -
11/32" O.D.
( 1 per pkt )
|
|
$23.50 |
|
OC8NE |
NEEDLE BEARING
1/4" SHAFT - 7/16" OD
( 1 per pkt )
|
|
$22.50 |
| |
OC6TB
|
BALL
THRUST BEARING SET CONSISTING OF 1 X BALL RETAINER AND 2 X HARDENED
STEEL WASHERS 3/16” DIA SHAFT |
|
$24.50 |
| |
OC8TB
|
BALL THRUST
BEARING SET CONSISTING OF 1 X BALL RETAINER AND 2 X HARDENED STEEL WASHERS
1/4” DIA SHAFT |
|
$22.50 |
|
FLEX
FERULES |
|
 |
OCFSF1818
|
FLEX FERULE
7/16" OD FOR CONNECTING .187 FLEX CABLE - .187 PROP
SHAFT |
|
$7.50 |
| OCFSF2518
|
FLEX FERULE
7/16" OD FOR CONNECTING .250 FLEX CABLE- .187 PROP
SHAFT |
|
$7.50 |
| OCFSF2525
|
FLEX FERULE
.7/16" OD FOR CONNECTING 250 FLEX CABLE- .250 PROP
SHAFT |
|
$7.50 |
|
FLEX HEXES
|
|
FOR COUPLING
FLEXIBLE CABLE TO THREADED MOTOR OUTPUT SHAFT - NOT FOR SOLID SHAFTS |
 |
OCFH1418
|
FLEX HEX 1/4"-28 THREADED MOTOR TO .187
ROUND FLEX CABLE |
|
$21.00 |
|
OCFH51618 |
FLEX HEX
5/16"-24 THREADED MOTOR TO .187
ROUND FLEX CABLE |
|
$21.00 |
|
OCFH51625 |
FLEX HEX
5/16"-24 THREADED MOTOR TO .250
ROUND FLEX CABLE |
|
$21.00 |
 |
OCFH5mm15
|
FLEX HEX
5mm THREADED MOTOR TO .150
ROUND FLEX CABLE |
|
$21.00 |
 |
OCFH6mm18
|
FLEX HEX
6mm THREADED MOTOR TO .187 ROUND
FLEX CABLE |
|
$21.00 |
| OCFH7mm18
|
FLEX HEX
7mm THREADED MOTOR TO .187 ROUND
FLEX CABLE |
|
$21.00 |
| OCFH8mm18
|
FLEX HEX
8mm THREADED MOTOR TO .187 ROUND
FLEX CABLE |
|
$21.00 |
|
|
OCFH6mm25
|
FLEX HEX 6mm THREADED MOTOR TO .250 ROUND
FLEX CABLE |
|
$21.00 |
| OCFH8mm25
|
FLEX HEX
8mm THREADED MOTOR TO .250 ROUND FLEX
CABLE |
|
$21.00 |
|
FOR
COUPLING FLEXIBLE CABLE TO SMOOTH MOTOR OUTPUT SHAFT - NOT FOR
SOLID SHAFTS |
 |
OCFHE5mm13
|
FLEX HEX 5mm
UNTHREADED MOTOR / SECURES WITH SET SCREWS TO .130 ROUND
FLEX CABLE |
|
$21.00 |
 |
OCFHE5mm15
|
FLEX HEX 5mm
UNTHREADED MOTOR SECURES WITH SET SCREWS TO .150 ROUND
FLEX CABLE |
|
$21.00 |
|
|
OCFHE5mm18
|
FLEX HEX 5mm
UNTHREADED MOTOR SECURES WITH SET SCREWS TO .187 ROUND
FLEX CABLE |
|
$21.00 |
 |
OCFHE1813 |
FLEX HEX
ELECTRIC 1/8"
UNTHREADED MOTOR SECURES WITH 6/23 SET SCREWS TO .130 ROUND
FLEX CABLE |
|
$21.00 |
|
|
OCFHE31613 |
FLEX HEX
3/16"
UNTHREADED MOTOR OR GEARBOX OUTPUT SHAFT SECURES WITH SET SCREWS TO .130 ROUND
FLEX CABLE |
|
$21.00 |
|
|
OCFHE18098 |
FLEX HEX
1/8"
UNTHREADED MOTOR OR GEARBOX OUTPUT SHAFT SECURES WITH SET SCREWS TO .130 ROUND
FLEX CABLE |
|
$21.00 |
|
|
OCFHE532098 |
FLEX HEX
5/32"
UNTHREADED MOTOR OR GEARBOX OUTPUT SHAFT SECURES WITH SET SCREWS TO .098 ROUND
FLEX CABLE |
|
$21.00 |
|
DELUXE
UNIVERSAL JOINT |
|
FOR
CONNECTING AN ELECTRIC MOTOR OR GEAR BOX OUTPUT SHAFT FOR USE WITH
SOLID SHAFTS ONLY |
|
 |
OC610SB |
FEMALE
UNIVERSAL THAT FITS INTO A 3/16" SMOOTH SHAFT AND OC610ML MALE UNIVERSAL
THAT FITS ON A 3/16" SMOOTH SHAFT BOTH ARE MADE FROM HARDENED AND PLATED
STEEL AND HAVE 2 SET SCREWS EACH |
|
$19.50 |
|
|
OC-UNIDLX1428 |
FEMALE
UNIVERSAL FOR CONNECTING 1/4-28 THREADED MOTOR AND MALE THAT FITS A
3/16" SOLID SHAFT WITH 2 x 8-32 SET SCREWs |
|
$19.50 |
|
STARTER BELTS
|
 |
OCSB14
|
17” MEDIUM STARTER BELT
|
|
$10.00 |
| OCSB17
|
17” MEDIUM STARTER BELT
|
|
$11.00 |
| OCSB19 |
19” LARGE STARTER BELT
|
|
$12.00 |
|
WATER OUTLETS & PICK UP
|
 |
OC
710
|
BRASS
WATER OUTLET
|
|
$5.00 |
 |
OCSW |
BRASS
STREAMLINED WATER PICK UP |
|
$7.50 |
 |
OCSWP |
BRASS
STREAMLINED WATER PICK UP + OC 7-10 OUTLET |
|
$10.50 |
 |
OC SMWP |
CAST
BERYLLIUM COPPER STERN MOUNT WATER PICK UP |
|
$20.50 |
|
BOLTS AND
SCREWS |
|
SS6329
|
9 SET SCREWS 6/32
|
|
$3.50 |
|
SS8329
|
9 SET SCREWS 8/32
|
|
$3.50 |
|
SS10329
|
9 SET SCREWS 10/32
|
|
$3.50 |
|
OC-BBOLT8
|
4 BUTTON HEAD BOLTS 8/32
|
|
$4.50 |
|
OC-BBOLT10
|
4 BUTTON HEAD BOLTS 10/32
|
|
$4.50 |
|
TNUT632
|
4 T-NUT &
HEX HEAD BOLTS
6/32
|
|
$3.50 |
|
TNUT832
|
4 T-NUT & HEX HEAD BOLTS 8/32
|
|
$3.50 |
|
TNUT1032
|
4 T-NUT &
HEX HEAD BOLTS
8/32
|
|
$3.50 |
|
MISCELLANEOUS |
|
HWALL
|
7 ASSORTED HEX WRENCHES IMPERIAL |
|
$7.50 |
|
OC468PB
|
PROP
BALANCER
|
|
$69.00 |
| |
OC
TA-2 |
TILLER
ARM FITS 3/16" SHAFT , HAS A SLOT FOR ALUMINIUM RUDDER BLADE |
|
$3.50 |
| |
OC9200
|
AUTO
BAILER
|
|
$15.00 |
 |
OC ANT2 |
ANTENNA
MOUNT #2
|
|
$6.80 |
| |
|
|
|
|
|
This is a registered trademark
of Octura Models, Inc, Skokie Illinois, USA |
|
|
OzForex Currency Converter
