|
 |
|
B.H HANSON TUNED PIPED &
HEADERS |
| |
|
|
|
 |
TUNED PIPE - WRAP TO CENTRE
|
BH
007 |
|
| To be used with wrap to center
(WTC) and deep vee headers. Also good for 231 engines and high RPM 260
engines |
 |
 |
|
|
TUNED PIPE - 1" BAND
|
BH
008 |
|
| |
Can be used with 260 engines
and all headers except wrap to center and deep vee |
 |
 |
| |
TUNED PIPE - 2" BAND |
BH
009 |
|
| |
Can be used with 260 engines
and all headers except wrap to center and deep vee |
 |
 |
|
 |
HEADER - WRAP TO FLUSH |
BH
001 |
|
| Wrap to flush header will put
pipe approximately 1 3/4 inch from engine centerline. |
 |
 |
 |
HEADER - WRAP TO CENTRE
|
BH
002 |
|
| Wrap to center header. Puts the header at center of boat. |
 |
 |
 |
HEADER - DEEP VEE |
BH
003 |
|
| Deep Vee header. header with
approximately 3 1/2 inch offset to put header in left side of boat. |
 |
 |
 |
90 DEG HEADER |
BH 028 |
|
|
90 Deg. header
with 1 inch offset and 90 Deg. bend.
|
 |
 |
|
 |
100 DEG HEADER |
BH 029 |
|
| 100 Deg. header
with one inch offset and 100 Deg. bend. |
 |
 |
|
 |
105 DEG HEADER |
BH 030 |
|
| 105 Deg. header
with one inch offset and 105 Deg. bend. |
 |
 |
| |
|
|
|
| |
STINGER MUFFLER |
BH
010 |
|
 |
Muffles and fits all BH Hanson marine tuned pipes |
 |
 |
| |
HEADER CLAMP & PIPE HOLDER |
BH
006 |
|
| |
This ring clamps to our 7/8th header pipe and stops
the pipe from sliding towards the engine. |
 |
 |
| |
HEADER FLANGE SET |
BH
005 |
|
| |
The flange supports our headers in a water-cooled
environment, enabling the exhaust to remain cool and dry |
 |
 |
| |
|
|
|
| |
|
|
|
| |
|
|
|
| |
|
|
|