Tel: 64-9-478 7378  /  Fax 64-9-478 7328     Email : highperformancemodels@xtra.co.nz

SPECIALISTS IN R/C PERFORMANCE MODEL BOATS FOR MEN ..........................NO TOYS FOR BOYS

 
 
 
 
 
 
       
 

MTRONIKS SPEED CONTROLLERS

 
       
    MICROVIPER MARINE 10  
 

The MicroViper Marine10 is very powerful for it's small size, it has been designed to run up to a maximum of 10Amps. With a 10Amp motor limit and it's incredibly small size, the MicroViper Marine10 is invaluable in the small scale boats where space is at a premium! But don't let it's small size fool you! Like it's bigger brothers in the Viper range, it is packed full of features, including motor short protection, motor stall protection, adjustable reverse including reverse disable, built in failsafe and is also 100% waterproof.

  • 10Amp motor limit
  • Motor short protection
  • Forwards, brake & reverse
  • 1.0KHz drive frequency
  • Adjustable reverse (incl. Disable)
  • Adjustable brakes
  • 4.8V - 12.0V input voltage
  • 1.2A BEC
  • Built in failsafe
  • 26.0mm x 25.6mm x 9.0mm
  • 100% Waterproof
  • Weight - 23.0g
 
       
    VIPER MARINE 15  
 

The Viper Marine15 is a Brushed Speed Control designed specifically for use in RC boats. The Marine15 has a 15Amp motor limit, what this means is that you can use any, DC Brushed motor, as long as the current drawn by that motor does not exceed 15Amps under load (with the prop connected, under water). The Marine15 is the perfect speed controller for anybody wanting to either upgrade their old Speed Controller for a no nonsense 15Amp limit reversible electronic Speed Control or for anybody who uses scale model RC boats at scale speeds. Features such as adjustable reverse functions and a built in failsafe are standard on this entry level Speed Control and the motor stall protection is a feature which cannot be overlooked when a possible encounter with weeds is always a possibility.

  • NEW built in failsafe to protect against complete loss of signal or when out of range
  • ABSOLUTE short circuit and motor overload protection
  • 15Amp motor limit
  • 1.2A BEC
  • Dual core microprocessor
  • 5 -10 cells input voltage (6.0-12.0V)
  • Adjustable features include programmable reverse (including disable)
  • 4 Layer super power circuit board
  • Thermal integrated protection system
  • Digital one touch set up
  • Legendary 100% waterproof design
  • Dimensions : L39.0mm x W34.0mm x H13.0mm
  • Weight : 55g
 
       
    VIPER MARINE 20  
 

The Viper Marine20 is a Brushed Speed Control designed specifically for use in RC boats. The Marine20 has a 20Amp motor limit, what this means is that you can use any, DC Brushed motor, as long as the current drawn by that motor does not exceed 20Amps under load (with the prop connected, under water). The Marine20 and is the perfect speed controller for anybody wanting to either upgrade their old Speed Controller for a no nonsense 20Amp limit reversible electronic Speed Control or for anybody who uses scale model RC boats at scale speeds. Features such as adjustable reverse functions and a built in failsafe are standard on this Speed Control and the motor stall protection is a feature which cannot be overlooked when a possible encounter with weeds is always a possibility.

  • NEW built in failsafe to protect against complete loss of signal or when out of range
  • ABSOLUTE short circuit and motor overload protection
  • 20Amp motor limit
  • 1.2A BEC
  • Dual core microprocessor
  • 5 -10 cells input voltage (6.0-12.0V)
  • Adjustable features include programmable reverse (including disable)
  • 4 Layer super power circuit board
  • Thermal integrated protection system
  • Digital one touch set up
  • Legendary 100% waterproof design
  • Dimensions : L39.0mm x W34.0mm x H13.0mm
  • Weight : 55g
 
       
    VIPER MARINE 40  
  The Viper Marine40 is a Brushed Speed Control designed specifically for use in RC boats. The Marine40 has a 40Amp motor limit, what this means is that you can use any, DC Brushed motor, as long as the current drawn by that motor does not exceed 40Amps under load (with the prop connected, under water). The Marine40 is the perfect speed controller for anybody wanting to either upgrade their old Speed Controller for a no nonsense 40Amp limit reversible electronic Speed Control or for anybody who uses anything from scale model RC boats at scale speeds to scale speed boats. The Marine40 is the highest powered marine speed controller in the Viper range of Speed Controls suited to RC model boats, which means it has all the same features as all the other Viper marine speed controllers but with more power! It also has everything you would expect on a more expensive Speed Control! Features such as adjustable reverse functions and a built in failsafe are standard on Marine40 and the motor stall protection is a feature which cannot be overlooked when a possible encounter with weeds is always a possibility.One difference to note between the Marine40 and the others in the marine range is that the Marine40 comes with user solderable posts instead on pre installed wires. This gives the user the option to use their own wiring looms.
  • NEW built in failsafe to protect against complete loss of signal or when out of range
  • ABSOLUTE short circuit and motor overload protection
  • 40Amp motor limit
  • 1.2A BEC
  • Dual core microprocessor
  • 5 -10 cells input voltage (6.0-12.0V)
  • Adjustable features include programmable reverse (including disable)
  • 4 Layer super power circuit board
  • Thermal integrated protection system
  • Digital one touch set up
  • Legendary 100% waterproof design
  • Dimensions : L39.0mm x W34.0mm x H13.0mm
  • Weight : 55g
 
       
    FAILSAFE 100% WATERPROOF  
 

The micro Failsafe is a must in any nitro/petrol RC model to protect the model from damage should you lose the signal from your transmitter due to low transmitter batteries or going out of transmitter range. The micro Failsafe also protects the model from a flat receiver battery. The micro Failsafe can be programmed to activate at a selectable receiver battery low voltage and can also be programmed to tell the servos to go to a certain position should the failsafe activate.

LEDs are used to tell you if signal and battery are good or bad!

  • 100% waterproof
  • LEDs indicate good or bad signal
  • LEDs indicate low battery
  • User defined failsafe position of the servos
  • Protection against loss of signal
  • Protection against low receiver battery
  • Very small, lightweight design
 
       
       
    This waterproof radio signal booster is designed to increase the strength of the signal from a chosen channel  
       
       
    ZERO GLITCH MODULE  
  ZGM - Zero Glitch Module is an opto isolator for use in any electric RC model. It is designed to cut all electrical connection between the speed control and the receiver whilst still maintaining a strong connection. This removes any interference caused by the connection between the speed control and receiver and has been known to improve the strength of the connection.

LEDs are used to show correct connection.

The ZGM is also 100% waterproof so can be mounted anywhere in the model.

 
       
    The waterproof servo reverser was designed to switch the throw of a servo electronically if needed.  
       

 

 Tel: 64-9-478 7378  / Fax 64-9-478 7328 Email : highperformancemodels@xtra.co.nz

THIS WEBSITE IS DESIGNED & MAINTAINED BY KIM KOCKOTT